D-Link DI-1162 - Manual (Page 32)

DI-1162 Remote Access Router
22 Installation
♦
Choose WAN1
♦
Please refer to the Configuration and Management section of
this manual for more detailed information regarding the items
in this screen.
♦
Position the cursor on the Save option at the bottom of the
screen and press to save the new setting.
5. Define and configure dial-in users who may access the router and
the LAN it is connected to (if applicable).
♦
From the Main Menu choose Advanced Functions ,
Remote Access Configuration, Dial-In User
Profile and press in the first empty field.
♦
Enter the dial-in user’s Username (might not be their real
name) and Password.
♦
Change the State to Enable .
♦
Please refer to the Configuration and Management section of
this manual for more detailed information regarding the items
in this screen.
♦
Position the cursor on the Save option at the bottom of the
screen and press to save the new setting.
The WAN port is now setup to receive calls from that user. At this
point, you may wish to define other users who will dial-in to the
router. Please note that User Profiles for dial-in users are valid for
any WAN port configured to receive calls.
6. Define a WAN port for dialing out.