D-Link DI-1162 - Manual (Page 65)

DI-1162 Remote Access Router
Configuration and Management 55
The parameters in the above window are described as follows:
•
Name – the maximum length is 64 characters. This username is for
password challenges (authentication). The user dialing in must
supply this username in order to be allowed access to the router.
•
Password – this is the password associated with the above Name
field.
•
Rem CLID – Remote Caller ID. This is the telephone number of
the Remote User and is used for security. When a phone number is
entered in this field, the router will make sure that the incoming
call is coming from the same phone number as the one defined
here. In other words, the remote user can only be calling from the
telephone number defined here, otherwise the call will not be
accepted. This function is disabled if the field is left blank.
•
Default IP – this is the IP address that will be assigned to the dial-
in user when the IP Address Supply setting below is set to Default.
Assigning an IP address to the remote computer ensures that the IP
address does not clash with other IP addresses on your network.
•
IP Address Supply – this field defines how the remote user will
obtain an IP address. The choices include:
Default – uses the Default IP address defined above,