D-Link DI-1162 - Manual (Page 142)

DI-1162 Remote Access Router
132 Using RADIUS Authentication
Items in the above submenu are described as follows:
♦
RADIUS State – enables/disables Radius.
♦
Type – refers to the type of external password protocol. Currently,
only Radius is supported.
♦
Server IP Address – this is the IP Address of your UNIX or NT-
based Radius server.
♦
Port – the port number for the Radius server. The standard port
number specified by RFC 1700 is 1812 (shown above).
♦
Key – this is a shared secret used to identify the DI-1162 as a valid
Radius client.
The Key password should be stored in the client file in the RADIUS
server’s /etc/raddb directory. Lines of the form
# Client Name Key
#-----------------------------