D-Link DI-1162 - Manual (Page 44)

DI-1162 Remote Access Router
34 Configuration and Management
setting may be used when you do not wish dial-in users or
networks to identify themselves or be subject to security.
•
Baud Rate – this parameter must be set to configure the
communication speed for asynchronous communication devices
(modems). Please refer to the communication device’s handbook
to get the proper setting.
Available asynchronous, communication device speeds are:
9600 / 19200 / 38400 / 57600 / 115200 baud.
For synchronous connections, the router will automatically match
the clock speed of the device being connected.
•
State – this is used to disable or enable this interface.