D-Link DI-1162 - Manual (Page 55)

DI-1162 Remote Access Router
Configuration and Management 45
The parameters are described below:
•
IP Address – enter the IP address of the host who will act as an
SNMP Management Station. The DI-1162 router will send SNMP
traps to these addresses.
•
SNMP Community String – the community string is a user-
defined identifying name used to group together some arbitrary set
of SNMP application entities managed by the network manager.
Traps will be sent to the IP Address (previous parameter) as long
as the corresponding Community String, in the Management
Station’s trap manager software, is the same.
•
Status – this validates or invalidates the use of the SNMP
Community String, by setting the use of the string to Valid or
Invalid. Note that setting the string to Invalid is the same as
removing the string, however, the string remains so as to be
validated again at an appropriate time.