D-Link DI-1162 - Manual (Page 149)

DI-1162 Remote Access Router
Appendix B – Specifications 139
Appendix B – Specifications
General
Network Protocols: IP (Internet Protocol)
WAN Protocols: PPP (Point-to-Point Protocol)
Multi-Link PPP, SLIP, HDLC
Routing Protocols: RIP and RIP V2.0
DVMRP, IGMP
Management: Local RS-232 Console Port (out-of-band)
Telnet (in-band)
SNMP MIB II and Enterprise MIB
Memory:
Flash Memory
System Memory
4MB
16 MB DRAM
No. of Ports and Type:
WAN
LAN
Add-on Module Slot:
2 DB-25 Ports
1 RJ-45 Port
1 LAN, 1 WAN, 2 WAN, 1 ISDN
WAN Interface:
2 EIA-530 DTE Ports
Async/sync, V.35, RS-232, RS-449
WAN Speeds (max):
Async
Sync
115.2Kbps
T1/E1 (2.048Mbps)
LAN Interface:
1 RJ-45 Port
10/100 NWay Auto-negotiation
Full/Half Duplex Ethernet/Fast Ethernet
Physical and Environmental
Weight: 3.3 kg (7.26 lbs)
Dimensions (W x D x H): 441 x 237 x 55 mm
(17.36 x 9.33 x 2.17 inch)
Operating Temperature: 0
°
to 50
°
C
(32
°
to 122
°
F)
Humidity: 5% to 95% (non-condensing)
Power: 100 – 240 VAC
47 – 65 Hz
EMI: FCC part 15 Class A
UL, CSA, TUV, BCIQ