D-Link DI-1162 - Manual (Page 115)

DI-1162 Remote Access Router
Configuration and Management 105
Counter
This feature displays some of the counters contained in MIBII and the
proprietary MIB. The table is updated every 5 seconds, and the counter
table can be reset by performing a system reset on the router. Note that
performing a system reset clears ALL tables in the router, including the
routing table.
LAN Counter Table
! Tx Packets – the total number of valid packets transmitted by the
router since the last reset.
! Tx Bytes – the total number of bytes transmitted by the router.
! Tx Discard Packets – the number of packets dropped by the
router.
! Tx Error packets – the number of invalid packets transmitted by
the router. This hardware counter shows the sum of Collisions,
Abort and Underrun packets.
! Tx Collision Packets – the number of packets sent out of the
router that collided on the line. Some collisions are inevitable due