ONICON F-2600 User Manual
Page 57
11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-2600 & F-2700 Vortex Flow Meter Manual 02/15 - 0808-7 / 19204
Page 57
3.3.1 Programming the Flow Meter
1. Enter the Set-up Menu by pressing the ENTER key until prompted for a password. (All
outputs are disabled while using the Set-up Menus.)
2. Use the ⇑ ⇓ ⇐ ⇒keys to select the password characters (1234 is the factory-set
password). When the password is correctly displayed, press ENTER to continue.
3. Use the Set-up Menus described on the following pages to customize the
multiparameter features of F-2600 & F-2700 Flow Meters. (The entire lower display
line is available for entering parameters.) Some items depicted in the graphic on the
preceding page may not be displayed based on flow meter configuration settings.
4. To activate a parameter, press ENTER. Use the ⇑ ⇓ ⇐ ⇒ keys to make selections. Press
ENTER to continue. Press EXIT to save or discard changes and return to Run Mode.
5. Program the UNITS menu first because later menus will be based on the units selected.