ONICON F-2600 - Manual (Page 120)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-2600 & F-2700 Vortex Flow Meter Manual 02/15 - 0808-7 / 19204 Page A-8
METER ORDERING INFORMATION
Vortex Meter Codification = F-26AAaa-BCD-EFGH
AAaa = Meter Size in Inches
0500
= ½” 0400 = 4”
3400 = ¾” 0600 = 6”
0100 = 1” 0800 = 8”
1500 = 1½” 1000 = 10”
0200 = 2” 1200 = 12”
0300 = 3"
B = Connection Type
0
= Wafer
1 = ANSI Class 150 flange
3 = ANSI Class 300 flange
6 = ANSI Class 600 flange
C = Integral or Remote Mount Transmitter
1
= Integral Mount
2 = Remote Mount
D = Temperature / Pressure Compensation
0
= Integral temperature compensation
1 = Integral temperature & pressure sensor, 30 psia maximum
2 = Integral temperature & pressure sensor, 100 psia maximum
3 = Integral temperature & pressure sensor, 300 psia maximum
4 = Integral temperature & pressure sensor, 500 psia maximum
9 = None
E = Input Power
0 = Loop powered (Only available with output signals option F=0)
1 = External 12-36 VDC powered
2 = External 85-240 VAC powered
F = Output Signals
0 = 4-20mA output*, pulse output & frequency output
1 = 4-20mA output, pulse output & frequency output, alarm output & MODBUS
2 = 4-20mA output, pulse output & frequency output, alarm output & BACnet
3 = (3) 4-20mA outputs, (3) alarm outputs, (1) pulse output (1) frequency output & MODBUS
4 = (3) 4-20mA outputs, (3) alarm outputs, (1) pulse output (1) frequency output & BACnet
5 = (3) 4-20mA outputs*, (3) alarm outputs, (1) pulse output (1) frequency output
6 = 4-20mA output*, pulse output & frequency output, alarm output
G = Maximum Operating Temperature
0 = 500° F
1 = 750° F
H = Energy Meter
0 = None
1 = Gross energy meter
2 = Net energy meter (requires additional remote temperature sensor)
*
Available with HART ® serial communications
Remote Temperature Sensor and Thermowell Installation Kit
(Required for net energy meter)
Part Number Description
20100 Remote Temperature Sensor, 1,000 Ω 4-wire Class A Platinum RTD
20101 Remote Thermowell Kit for 1½” Welded Steel Pipe
20102 Remote Thermowell Kit for 2” - 5” Welded Steel Pipe
20103 Remote Thermowell Kit for 6” - 14” Welded Steel Pipe
Note: Net energy meter requires one temperature sensor and one thermowell installation kit sized to pipe.