ONICON F-2600 - Manual (Page 12)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-2600 & F-2700 Vortex Flow Meter Manual 02/15 - 0808-7 / 19204 Page 12
1.1.2 Receipt of System Components
When receiving an ONICON mass flow meter, carefully check the outside packing carton
for damage incurred in shipment. If the carton is damaged, notify the local carrier and
submit a report to the factory or distributor. Remove the packing slip and check that
all ordered components are present. Make sure any spare parts or accessories are not
discarded with the packing material. Do not return any equipment to the factory without
first contacting ONICON Customer Service.
1.1.3 TECHNICAL ASSISTANCE
If you encounter a problem with your flow meter, review the configuration information
for each step of the installation, operation and set up procedures. Verify that your settings
and adjustments are consistent with factory recommendations. Refer to Section 5,
Troubleshooting, for specific information and recommendations.
If the problem persists after following the troubleshooting procedures outlined in Section
5, contact ONICON Incorporated Technical Support at (727) 447-6140 between 8:00 a.m.
and 5:00 p.m. EST. When calling Technical Support, have the following information on
hand:
The serial number and model number (shown on the meter nameplate)
The problem you are encountering and any corrective action taken
Application information (fluid, pressure, temperature and piping configuration)
1.1.4 WARRANTY
Warranty ONICON’s complete warranty is included in Appendix D of this manual
as part of the “Conditions of Sale”. ONICON provides a two-year warranty.