Mes2 models – Nortec MES2 User Manual

Page 6

3 | Introduction

MES2 Models

The MES2 is the most advanced OEM steam humidifier available and provides steady and
reliable humidification using the same proven cylinder technology as Nortec’s commercial
NHTC. The MES2 is offered in 5 models corresponding to control configurations as shown in
Figure 2. The remote configurations include 8 ft (2.4 m) of wiring for connecting the controls
to the plumbing cabinet. The Primary Voltage Wiring (PVW) model provides 8 feet of primary
wiring for connection to the contactor.

Figure 2: MES2 Models

The MES2 is available in 6 capacities ranging from 5 to 30 lb/hr (2.3 to 13.6 kg/hr) for
operation on a range of voltages and phases as outlined in Table 1: MES2 Part Numbers and
Electrical Data. The 6 capacities are packaged in 4 different cabinet sizes as shown in Figure 3.

Figure 3: MES2 Capacities and Cabinets

5 lb/hr

(2.3 kg/hr)

15 - 20 lb/hr

(6.8 - 9.1 kg/hr)

25 - 30 lb/hr

(11.4 - 13.6 kg/hr)

10 lb/hr

(4.5 kg/hr)

(REM CE)

(ATT OE)

(ATT CE)

(ATT CE PVW)

(REM OE)

Remote

Attached

Attached PVW

N/A

cal