NavCom SF-3050 Rev.I - Manual (Page 99)

SF-3050 GNSS Product User Guide – Rev I
80
14. Select Bluetooth as the Connection Type.
15. Under COM Port Settings, select the appropriate COM Port (refer to Figure 92,
above).
16. Click to connect to the SF-3050.
17. Verify Bluetooth connectivity:

View the Bluetooth LED on the SF-3050 front panel (refer to Table 12).
Table 12: Bluetooth Connectivity LED Indication

Type [PING] in the Input Terminal and click the Send button. If properly connected,
the response is [PING]BT(see Figure 95).
Figure 95: Input Terminal
– PING Command and Response

To use an input terminal to determine the Bluetooth Virtual COM port on a
PC and connect to the SF-3050 via Bluetooth, refer to the BTSET message
in the Sapphire Technical Reference Manual
and to the section “Establish
Bluetooth via the Input Terminal” in the StarUtil 3000 User Guide.
Icon Indicator Status Description
Bluetooth
Off Bluetooth off
Blue Blinking
Bluetooth on,
no connection
Blue Bluetooth connected