NavCom SF-3050 Rev.I User Manual
Page 14
SF-3050 GNSS Product User Guide
– Rev I
xii
Chapter 2, Unique Features section -added StarFire Over IP.
Rev E
(Dec 2011)
Chapter 2, section Antennae and section Base
– added new link for
antennae calibration values (12/15/11)
Rev E
(Oct 2011)
Appendix C, changed StarFire
visibility from “76
N to 76
S latitude
”
“10 degree look angle”
Chapter 3, revised the Note below Figure 91; added a Note
regarding missing cable pins
Added StarFire GNSS service specifications throughout manual
Corrected 1PPS pulse characteristics in Chapter 3
Specifications: added pulse width to 1PPS
Rev D
(Nov. 2010)
Updated graphics throughout , as necessary, to reflect new StarUtil
3000 GUI designs
Added NTRIP standards to “Related Standards” section in front
matter
Chapter 1:
in the “Product Configuration Files” section: updated the
first Note to reference Bundle A; in t
he “Connect Equipment”
section: updated the Note re availability of Bluetooth connectivity; in
the “Establish Communications” section: changed the USB driver
warning to a Note and added a Note re installing file
“navcomx1c45x3050.inf” before starting Star Util 3000; deleted
ambiguous Step 14; in new Step 14, added Mass Storage as a USB
Port option; updated Step 16 (now Step 15) to include AutoBaud
button; updated “Determine Current Firmware Versions” section:
added to the Note that firmware ensembles are always referenced
to the Navigation Firmware number; updated Figure 9 to include
unified file; added “Determine Firmware Version via the Input
Terminal” section; in the “Upload Firmware” section: changed the
first two warnings to Notes;
added “Upload a Unified Firmware File”
section; added “Upload a Single Firmware File” section; updated the
“Upload Software Options” section and added Bundle A; added
“Upload Software Options via the Input Terminal” section; updated
“Upload StarFire License” section to align it with new StarUtil 3000
GUIs and their functionality;
added “How to Cancel a StarFire
License” section; added the “Enable or Disable Receiver Tracking
and/or Use of Select Signals and Frequencies” section; added
“Enable or Disable Receiver Use of Signals for Navigation” section
Chapter 2: Upda
ted “GNSS Sensor System” section: added
software Bundle A; updated the RTK description; deleted footnotes
and revised notes;
in the “Accuracy” section: added info re L1-RTK;
in the “SBAS” section: added a Note re the TRACKINGMODE
command and ; added a footnote that Galileo is not supported in the
current firmware (v.2.0.22.0);
in the “Features” section: updated