NavCom SF-3050 Rev.I - Manual (Page 38)

SF-3050 GNSS Product User Guide – Rev I
19
Refer to Figure 33 for the steps below:
70. Click the Retrieve Settings From the Receiver button to retrieve the currently set
navigation modes from the receiver.
71. Select the ON radio button next to StarFire if StarFire is not enabled.
72. Click the Apply Changes to the Receiver button to enable StarFire navigation. Then
click Close.
73. Select StarFire License in the File Upload window on the Receiver Options tab (see
Figure 34).
Figure 34: StarFire License
74. Click .
75. Browse to NavCom\StarFire License on the PC. The StarFire License file extension is
*.lic.
76. Select the StarFire License file. The path to the file appears in the upload field (see
Figure 34).
77. Click the Upload button. At the end of the upload, a confirmation box opens. Click OK.

The Input Terminal window displays the outcome of the upload (see Figure
35). In the example below, the upload is successful. Refer to the Sapphire
Technical Reference Manual for detailed information on the
INPUTSFLICENSE command (see Related Documents in the fore-matter).
Figure 35: Successful StarFire License Upload
78. Ensure that the purchased StarFire License is loaded. These tabs provide license
information:

Receiver Options tab: StarFire Licenses and License Status windows

StarFire tab: License Info window

To open the StarFire tab, click StarFire in the Detailed Views menu (see
Figure 36).