NavCom SF-3050 Rev.I - Manual (Page 101)

SF-3050 GNSS Product User Guide – Rev I
82

Logging to USB Flash Drive via USB Host Cable, for setup and logging
instructions.
Table 14: Optional USB Host Cable Pin Assignment
Figure 97: Optional USB Host Cable Pin Assignment
Ethernet Cable (Option)
P/N 94-310265-3006LF is an optional 6ft (1.83m) data cable fitted with a Positronic plug
type and a
Ethernet RJ45 plug type, used to connect directly to an Ethernet connector. The pin
assignments are provided below.

COM1 - LAN is the only Ethernet (LAN) compliant port.

Refer to the section below, Direct Ethernet Connection via Static IP
Address, for setup instructions.
Table 15: Optional Ethernet Cable Pin Assignment
1
2
9
3
4
5
6
7
8
PN: 94-310271-3006LF
09-00005-A
1
2
3
4
5
6
7
8
9
Positronic
1
2
3
4
USB
Pin 1
Pin 4
USB A
Receptacle
Front View
NavCom
Receiver
USB Pins Signal Positronic Pins
1 USB PWR 1
2 USB D- 8
3 USB D+ 7
4 GND/SHIELD 9
Ethernet Pins Signal Positronic Pins
1 TX+ 6
2 TX- 7
3 RX+ 2
6 RX- 1