NavCom SF-3050 Rev.I - Manual (Page 127)

SF-3050 GNSS Product User Guide – Rev I
108
QuickStart
 RapidRecovery is available only on the GPS portion of the StarFire correction, which
constitutes the larger weighted component of the correction
 RapidRecovery is not available for the first 5 minutes after a successful quick start is
completed
 When a lower FOM_limit value is input, the receiver is more constrained in completing
a Rapid Recovery process
 In order for RapidRecovery to function, the outages must not exceed 2 minutes.
 Requires one minute to complete
 Option to manually enter coordinates to initiate feature
Failed Search
Whether from loss of reception or lack of initial acquisition, after a 5-minute failed search
for a StarFire satellite, the receiver automatically searches for another available StarFire
satellite.
This functionality only applies to:
 Receivers licensed for both StarFire Net 1 and Net 2
 Receivers only licensed for StarFire Net 1 in areas where signals from 2 StarFire
satellites overlap and may be available.
Reassignment of StarFire Network List
Satellites 609 and 643 have been reassigned to provide improved reception. Satellite
609, which was in Net1, is now in Net2, and satellite 643, which was in Net2, is now in
Net1 (See Tables 23, 24 and 25).
Table 23: StarFire Satellites v.1.0.1.5 and Earlier
Network Satellite ID Longitude
Satellite
Name
Uplink Site
Net 1
402 97.65W PAC-E Laurentides
609 109E IND-E Auckland
525 25E IND-W Burum
Net 2
358 142W PAC-C Santa Paula
643 143.5E PAC-W Perth
484 15.5W AOR-E Southbury