NavCom SF-3050 Rev.I - Manual (Page 150)

SF-3050 GNSS Product User Guide – Rev I
C-131
The network is a fully automated self-monitoring system. To ensure overall system
integrity, an independent integrity monitor receiver, similar to a standard StarFire user
receiver, is installed at every reference station to monitor service quality. Data from these
integrity monitors is sent to the two independent processing hubs in Torrance, California
and Moline, Illinois. Through these integrity monitors, the network is continuously checked
for overall SBAS positioning accuracy, L-Band signal strength, data integrity, and other
essential operational parameters.
StarFire Satellites
Table 27: StarFire Satellites v. 1.0.1.5 and Earlier
Network
Satellite
ID
Longitude
Satellite
Name
Uplink Site
Net 1
402 97.65W PAC-E Laurentides
609 109E IND-E Auckland
525 25E IND-W Burum
Net 2
358 142W PAC-C Santa Paula
643 143.5E PAC-W Perth
484 15.5W AOR-E Southbury
Table 28: StarFire Satellites v. 2.0.15.0 and Later
Network
Satellite
ID
Longitude
Satellite
Name
Uplink Site
Net 1
402 97.65W PAC-E Laurentides
643 143.5E PAC-W Perth
525 25E IND-W Burum
Net 2
358 142W PAC-C Santa Paula
609 109E IND-E Auckland
484 15.5W AOR-E Southbury

Satellites 609 and 643 have been reassigned to provide
improved reception. Satellite 609, which was in Net1, is now in
Net2, and satellite 643, which was in Net2, is now in Net1.
Table 29: StarFire Satellites v.3.0.12.0 and Later
Network
Satellite
ID
Longitude
Satellite
Name
Uplink Site
Net 1
402 97.65W PAC-E Laurentides
643 143.5E PAC-W Auckland
525 25E IND-W Burum
Net 2
678 178E POR Santa Paula
564 64E IND-E Perth
446 54W AOR-W Southbury
484 15.5W AOR-E Southbury