NavCom SF-3050 Rev.I - Manual (Page 49)

SF-3050 GNSS Product User Guide – Rev I
30
(v.3.0.16 or later)
 GGA
– GPS Fix Data
 GLL
– Geographic Position – Lat /Lon
 GNS
– GNSS Fix Data (v.3.0.16 or later)
 GRS
– GPS Range Residuals
 GSA – GNSS DOP & Active Satellites
 GST – GNSS Pseudorange Error Statistics
 GSV – GNSS Satellites In View
 HDT
– Heading Degrees True
 MLA
– GLONASS Almanac Data
 RMC
– Recommended Min. Specific GNSS Data
 ROT
– Rate of Turn
 RRE – Range Residual Errors
(This command is not defined in NMEA 0183 Standard version 3.0.)
 TTM
– Moving Base / Rover RTK data
 VTG
– Course Over Ground & Ground Speed
 ZDA
– Time & Date
 Proprietary (header $PNCT)
Described in the Sapphire Technical Reference Manual (see Related Documents in the
fore-matter)
 DTM
– Datum Reference for user-selected reference frame
 GGA
– GPS Fix with Field 14
 GST – GNSS Pseudorange Error Statistics
 MDE – Marginally Detectable Error
 SET – Solid Earth Tide
 Software Bundles
Software Options may be purchased in a bundle and/or individually.
The Software Options File contains all of the purchased Software Options, whether
purchased in a bundle or individually. The initial Software Options File must be uploaded
to the receiver to enable the functionality of the SF-3050. Later purchased software
upgrades are also provided in a Software Options File for upload.
SF-3050G
The SF-3050G is a multi-constellation,
StarFire-enabled
2
GNSS receiver system for users that require high-availability,
worldwide, decimeter accuracy.