MovinCool Classic 40 Service Manual - Manual (Page 55)

Repair Section
55
7.2 Disassembly
1) Remove the four air filters.
2) Take out the four (4) bolts, and then remove the
front panel.
3) Take out the three (3) screws, and then open the
control box cover.
4) Disconnect the three (3) power supply wires from
the terminal, and disconnect the ground wire.
5) Take out the eight (8) bolts, and then remove the
left panel.
I002628
Bolts (4)
Air Filter
Front Panel
Air Filter
I002629
Control Box Cover
Screws (3)
I002630
Power Supply Wires (3)
Terminal
Ground Wire
I002631
Bolts (8)
Left Panel