MovinCool Classic 40 Service Manual - Manual (Page 39)

Operation Section
39
5.11 Fan Motor
(1) For evaporator
• The fan motor is a three-phase, induction type.
• The following table shows the specifications of
the fan motor.
Specifications:
< NOTE >
An internal overload relay is used to protect the fan motor. This relay is built into the fan motor and
interrupts the flow of current when abnormally high temperature builds up in the fan motor.
(2) For condenser
• The fan motor is a three-phase, induction type.
• The following table shows the specifications of
the fan motor.
Specifications:
Rated Voltage 220/240 V
Rated Output 750 W
Rated Voltage 220/240 V
Rated Output 400 W
I003093
I003094