MovinCool Classic 40 Service Manual - Manual (Page 17)

Operation Section
17
3.2 Basic Construction
• The interior of Classic 40 is divided into two sections. The front section houses the evaporator
and control box, and the rear section houses the condenser and the compressor.
3.3 Air Flow
(1) Air flow for the condenser
• Air drawn from the sides and rear inlets passes through the condenser which extracts the heat.
This hot air is blown out through the exhaust air duct on top of the unit.
(2) Air flow for the evaporator
• Air drawn from the front inlet passes through the evaporator and is cooled. This cool air is blown
out through the upper outlet on top of the unit.
• Cooling air duct (optional) can be installed to cool the object.
• All air inlets are provided with air filters.