MovinCool Classic 10 Service Manual - Manual (Page 56)

Repair Section 56
5) Take out the four (4) bolts, and then remove
the fan motor.
9.4 Removal of Electrical Components
1) Take out the eight (8) screws, and then remove
the control panel.
I002605
Control Panel
Screws (8)
(1) Removal of control panel
WARNING
Disconnect power supply from the unit before performing any service. Beware that some
residual voltage may remain in the unit immediately after the power is disconnected.
ILL00575-00
Bolts (4)
Fan Motor