MK Products CobraTig 150 XM - Manual (Page 29)

CobraTig 150 Owner's Manual P/N 091-0541 - Page 2
Higher Contrast
Press this button to increase the contrast for the LCD screen. This will
make the display darker as the number increases.
Change Units
Press this button to toggle units from INCHES to METRIC. It will only af-
fect the screen display when using AUTO PROCEDURE GENERATION,
see MAIN MENU.
Change Sound
Press this button to enable or disable sound.
Change Click
Press this button to enable or disable button clicks.
Change Light
This toggles the LCD backlight either ON or OFF. The AUTO setting will
sense ambient light and change the backlight to adjust accordingly.
Lower Contrast
Press this button to decrease the contrast for the LCD screen. This will
make the display lighter as the number decreases.
Section 16 Diagnostic Menu
This screen will show the units internal total on-time diagnostics. This in-
cludes number of times unit was powered on, the total on-time, the number
of welds performed, total arc time and number of times a weld procedure was
saved.
Help
Press this button to read a brief description of the DIAGNOSTIC MENU
button descriptions and functions.
Main Menu
Press this button to return to the MAIN MENU.