MK Products CobraTig 150 XM - Manual (Page 22)

CobraTig 150 Owner's Manual P/N 091-0417 - Page 22
Accept Entries
Once the first three variables are entered into the APG screen this button
may be pressed, thus bypassing any additional features and changing
directly to the WELD ORBITAL screen.
Previous Entry
Press this button to return to the previous field in order to change the
entered value.
Next Entry
Press this button to jump to the next field in order to change the entered
value or add a new value.
Gas On/Gas Off
This button is used to manually toggle the gas flow either “ON” OR
“OFF”. This button is used to indicated the status of the gas flow.
When the button reads “GAS ON”, the gas solenoid valve is open and
the gas flowing.
When the button reads “GAS OFF”, the gas solenoid valve is closed and
the gas is not flowing.
Section 12 Print Menu
At the PRINT MENU, many different aspects of the CobraTig® 150 XM can
be printed or modified. Not only can various printouts of weld procedures, list
of procedures, and calibration reports be made but the printer configuration
can be modified to print on command or automatically.
Help
Press this button to read a brief description of the PRINT MENU button
descriptions and functions.
Main Menu
Press this button to return to the MAIN MENU.
Print Graph
This function works with the Printer After Welds function. Pressing this
button toggles the command from YES (prints weld procedure param-
eters plus entire weld graph), to NO (prints weld procedure parameters
only).