MK Products CobraTig 150 XM - Manual (Page 15)

CobraTig 150 Owner's Manual P/N 091-0541 - Page 15
This is the starting menu for the CobraTig® 150 XM orbital welder. It is from
this menu that all the other menu displays and screens are accessible. From
each menu display, there is a one-step button back to this menu.
This is not to say that every time this unit is turned on that it will start at this
screen. The operating program is such that it will remember the last screen
when the unit is turned off. When the unit is turned on again, it will start with
the last screen displayed.
Help (Defines the Main Menu button selections)
Press this button to read a brief description of the MAIN MENU button de-
scriptions and functions.
Section 7 Weld Manual
From the MAIN MENU screen, the WELD MANUAL button must be pressed
in order to access the WELD MANUAL screen.
User Interface Programming Sequence
· From the Main Menu.
· Press F2 Weld Manual, permits manual welding.
· Press F7 and enter Pedal On, permits use of foot control for weld
current Upslope and Final slope control and continuous
welding.
· Press F7 and enter Pedal Off, permits use of ON/OFF switch with
programmable weld current upslope and final slope times from
0.00~1.0 seconds each.
· Press F4 or F9 and scroll to Curr. H. (A), high weld current in amps.