MK Products CobraTig 150 XM - Manual (Page 20)

CobraTig 150 Owner's Manual P/N 091-0417 - Page 20
Each time this button is pressed, the locations of where each weld
procedure is saved or can be saved to, will move three numbers to
the left.
Those locations with the word EMPTY above the number, indicate
that there is no weld procedure saved in that location.
Locations
When a location button is pressed, and if that location is already
occupied with a weld procedure, another screen will appear with an
OVERWRITE VERIFY message.
If the current procedure is to be saved at this location, press “YES”.
If this location is to be emptied, and the saved weld procedure
erased, press “EMPTY ONLY”. If nothing is to be done with this
location, and you need to return to the SAVE PROGRAM MENU,
press “NO”.
Scroll Right
Each time this button is pressed, the locations of where each weld
procedure is saved or can be saved to, will move three numbers to
the right.
Those locations with the word EMPTY above the number, indicate
that there is no weld procedure saved in that location.
Weld Mode