MK Products CobraTig 150 XM - Manual (Page 19)

CobraTig 150 Owner's Manual P/N 091-0541 - Page 1
The bottom three buttons on this screen indicate the number of the
location where weld procedures are saved. Using the SCROLL
LEFT and SCROLL RIGHT button, will move the locations accord-
ingly to show the status of each location.
Those locations with the word EMPTY above the number, indicate
that there is no weld procedure saved in that location.
Scroll Right
Each time this button is pressed, the locations of where each weld
procedure is saved will move three number locations to the right.
Those locations with the word EMPTY above the number, indicate
that there is no weld procedure saved in that location.
If the current weld program is a temporary, unsaved/modified program, the
RECALL screen will be blank. This indicates that the current weld program
has not been saved to any location. However, if the current weld program is
from one of the saved locations, this screen will display the location it is pres-
ently saved at.
Press any button that does not contain the word EMPTY. Press WELD
ORBITAL to return to that screen to begin welding with the saved proce-
dure.
Section 10 Save Program
Once a weld procedure has been developed, it is generally a good idea
to save it for use at a later date. In order to do this, simply press the
SAVE PROGRAM button. This will change to the SAVE USER MEMO-
RY screen.
Help
Press this button to read a brief description of the SAVE menu button
descriptions and functions.
Main Menu
Press this button to change to the MAIN MENU.
Weld Orbital
Press this button to change to the WELD ORBITAL screen.
Communication Menu
Press this button to change to the COMMUNICATION MENU.
Scroll Left