MK Products CobraTig 150 XM - Manual (Page 18)

CobraTig 150 Owner's Manual P/N 091-0417 - Page 18
graph has reached the top of the scale. There is also a change in the
sound once the maximum has been reached, from a single ‘beep’ to a
triple ‘beep’.
Section 9 Recall Program
Press the RECALL PROGRAM in order to access the library of operator
saved weld procedures.
NOTE: If the currently used procedure is not saved, a warning screen
of text will prompt for a ‘YES’ or ‘NO’ answer: this is the OVERWRITE
screen. Anytime there is a potential change to the existing weld pro-
cedure, this screen will appear.
If ‘NO’ is pressed, the screen will return to the WELD ORBITAL screen.
If ‘YES’ is pressed, the screen will change to RECALL USER MEMORY.
Help
Press this button to read a brief description of the RECALL menu
button descriptions and functions.
Main Menu
Press this button to return to the MAIN MENU.
Weld Orbital
Press this button to return to the WELD ORBITAL screen.
Scroll Left
Each time this button is pressed, the locations of where each weld
procedure is saved will move three number locations to the left.
Locations