MK Products Advanced Color Logic - Manual (Page 48)

Advanced Color Logic Owner’s Manual - Page 41
1.
Next Level - Advances welding to the next level
2.
Final Slope - Advances welding to final slope level
3.
Head Angle - Specifies weldhead angle
4. Gas - Turns gas on or off. Icon shows when the gas is on or off. Since gas operation is automatic during
welding, this button is only active when not welding.
5. Start/Stop - Begins or ends welding
6. Motor - Consists of three possible actions:
A. Motor Home - Starts motor homing
B. Motor Jog Forward - Jogs motor forward using job speed below as long as it is pressed.
C. Motor Jog Reverse - Jogs motor in reverse using jog speed below as long as it is pressed.
7. Not Yet Implemented
8. Jog Speed
- Specifies jog speed to be used for motor jogging.
9. Amps % Scale
- Specifies the amount of current adjustment needed when welding.
10. Motor % Scale
- Specifies the amount of motor speed adjustment needed when welding.
Operating the ACL from the Graphical Interface
There are a number of actions you can make from the control window of the graphical interface (see
below). This window contains buttons used to adjust weld-related tasks.
Most of the buttons have a shortcut key (a keyboard stroke or an HHC button) assigned to them.
Refer to your owner’s manual for a more in-depth description.
1 2 3 4
5
6
7
8
7
9 10
7
A
B
C