MK Products Advanced Color Logic - Manual (Page 47)

Advanced Color Logic Owner’s Manual - Page 40
Figure 6
Opening an Existing Procedure
If you have a saved weld procedure that you want to use, clicking the Open icon brings up a window
with all saved weld procedures in the internal memory (Figure 5). Selecting a different location button
will list the procedures stored there.
After selecting your procedure and clicking Open, the procedure’s settings will be loaded into the
ACL and can be viewed on the weld procedure window of the graphical interface (Figure 6). Modifications are
made in MK Edit (see page 7).
To access the Ethernet location, make sure the settings are selected in the network tab of the preferences
dialog (see pg 2 for its location in the drop down menu).
Please Note: Most USB memory thumb drives will work; however, some occasionally will not be
recognized and therefore may not work. If this occurs, try a different drive.
Figure 5
Select button to view
procedures saved there
Displays information
for the selected
procedure