Microsonic LCA-2 - Manual (Page 6)

Page 6 of 51 Preparation
I
NSTALLING THE
S
OFTW ARE
 Start your computer and wait until Windows has booted.
 Insert the installation USB stick into the computer
 If autostart function is active, installation starts immediately, otherwise open Start.EXE from the
USB stick.
 ... or get the current LinkControl software from our website and start "Setup.EXE"
 Follow the instructions on the screen.
The following files are copied into this directory:

LinkControl.exe executable program file

Updater.exe used for updating LinkControl

LinkC_E.chm English help file

LinkC.ini configuration file for LinkControl

LinkC.lst list of microsonic sensors

Parameter Directory with the default - parameter files of microsonic - Ultrasonic
Sensors

Driver folder with the driver, used for the LCA-2