Microsonic LCA-2 - Manual (Page 41)

Parameter change in the web edge sensor bks+ Page 41 of 51
F ILTER S ETTING
The filter type F can be chosen from 0 to 3. Where is:
0: No Filter
1: Moving average
2: Median filter
The filter strength can be varied for each filter types between 0-9.
O THER S ETTING
LED S OFF 30 SECONDS FROM LAST KEY PRESS :
If this feature is activated, the LEDs are off 30 seconds after the last key press. This is needed eg for light-
sensitive materials.
CHARACTERISTICS LINEARIZATION :
The characteristic is linearized so that it has a straight course within its limits.
T EMPERATURE COMPENSATION :
see Temperature compensation on page 19
T OUCH C ONTROL :
see Fehler! Verweisquelle konnte nicht gefunden werden. on page 19