Noise interference filter – Microsonic LCA-2 User Manual
Page 20
Page 20 of 51
Changing parameters on distance measuring sensors
mm:
the measured distance value is indicated in mm and/or cm
0...100%:
the measured distance value is indicated as percentage value of the analogous
characteristic, be-gun from the sensor-near vertex up to the sensor-far vertex
100...0%:
the measured distance value is indicated as percentage value of the analogous
characteristic, be-gun from the sensor-far vertex up to the sensor-near vertex
N
OISE
I
NTERFERENCE
F
ILTER
Only for pico+ or lcs+ sensors
Interfering ultrasonic signals, which are not produced by the sensor itself can be suppressed by the
activation of the noise interference filter.
This manual is related to the following products: