Measurement Computing TempBook rev.3.0 - Manual (Page 10)

1-4 Introduction and Quick Start, 11-14-00 TempBook User’s Manual
Power Connection
The TempBook is typically powered from the supplied wall-mount converter or from an optional DBK30A
battery module. The wall-mount converter plugs into any standard 110 VAC wall outlet and its other end
plugs into the circular DIN5 receptacle on the TempBook's rear panel. If using the battery module, please
refer to the section Rechargeable Battery Module in chapter 2.
TempBook Power Connection
Software Installation
The TempBook/66 comes with a Microsoft Windows application (16-bit TempView) that provides the
easiest means to collect data from the TempBook. To install the software insert the installation CD into
your PC’s CD drive. After agreeing with the legal statement a master setup screen will appear (see
following figure).
Selecting TempBook Support from the Master Setup Screen
After selecting TempBook Support, click Start Install and follow the on-screen prompts.
Once the setup program has installed the software, a TempBook program group will appear within
Windows. To start TempView, click on its program icon. The main window will soon display a
spreadsheet of channels in rows and channel parameters in columns.
For information regarding the use of TempView, refer to chapter 3.