Measurement Computing IOtech 640 Series - Manual (Page 88)

A-2 Using the Daq Configuration Applet 907493 Appendix A
The “Select Device Type” Dialog Box
This dialog box opens when the button of the Device Inventory dialog box is clicked. The
box contains a pull-down list.
The device type you select for configuring will appear in the main edit box. Clicking on the button
will then open the Properties Dialog Box.
Daq Configuration
Select Device Type Dialog Box
Properties Dialog Box
This dialog box opens when the button of the Device Inventory dialog box is clicked, or when
the button of the Select Device Type dialog box is selected. It displays the properties for the 640/650
device with the default configuration settings.
Daq Configuration - Properties Dialog Box