Measurement Computing DAQFlex User Guide - Manual (Page 80)

DAQFlex Software User's Guide DAQFlex Message Reference – Reflection messages – AITRIG
80
XFRSIZE
 Get the number of bytes used in the transfer of each data sample.
Message
"@AISCAN:XFRSIZE"
Response "AISCAN:XFRSIZE=<implementation>value"
implementation FIXED%, or not specified if value is NOT_SUPPORTED
value The number of bytes, or NOT_SUPPORTED
Example "AISCAN:XFRSIZE=FIXED%2"
AITRIG
Get the analog input trigger properties of a device.
Properties
RANGES, REARM, SRCS, TYPES
RANGES
 Get the supported ranges for a device's analog input trigger circuit.
Message
"@AITRIG:RANGES"
Response "AITRIG:RANGES=implementation>value"
implementation FIXED%, PROG% (programmable), HWSEL% (hardware selectable),
or not specified if value is NOT_SUPPORTED
value A list of all valid ranges for the specified analog trigger source or
device, or returns NOT_SUPPORTED if the device doesn't support
analog triggering of analog input or the trigger source is not valid for
the device.
Example "AITRIG:RANGES=PROG%BIP10V,BIP5V"
Note On some devices, the values returned may be dependent on channel configuration
settings.
REARM
 Get a value indicating whether the device supports continuous triggering of the analog input.
Message
"@AITRIG:REARM"
Response "AITRIG:REARM=implementation>value"
implementation FIXED%, PROG%, or not specified if value is NOT_SUPPORTED
value ENABLE, DISABLE, or returns NOT_SUPPORTED if the device doesn't
support continuous triggering of analog input.
Example "AITRIG:REARM=PROG%ENABLE,DISABLE"