Measurement Computing DAQFlex User Guide - Manual (Page 113)

DAQFlex Software User's Guide Hardware Reference – USB-1608G Series
113
Component Supported
Property/Command Set/Get Supported Values
CTR
Get Number of counter channels
CTR{ch}
START
STOP
VALUE Get 0 to 4,294,967,295
Set 0
DEV
FLASHLED/{n} Set 0 to 255
FWV Get MM.mm (M = major; m = minor)
ID Set/Get Up to 56 characters
MFGCAL Get yyyy-mm-dd HH:MM:SS
MFGCAL{item} Get YEAR as yyyy; 20xx
MONTH as mm; 01 to 12
DAY as dd; 01 to 31
HOUR as HH; 01 to 23
MINUTE as MM; 01 to 59
SECOND as SS; 01 to 59
MFGSER Get Up to 8 hexadecimal digits
RESET Set DEFAULT
TEMP Get Floating point numeric in ºC
DIO
Get Number of digital ports
DIO{port}
Get 8
DIR Set/Get IN, OUT
LATCH Set/Get 0 to 255
VALUE Set/Get 0 to 255
DIO{port/bit}
DIR Set/Get IN, OUT
LATCH Set/Get port number: 0
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
VALUE Set/Get port number: 0
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
TMR
Get Number of timer channels
TMR{ch}
DELAY Set/Get 0 to 67.11 s
DUTYCYCLE Set/Get 0 to 100%
IDLESTATE Set/Get LOW, HIGH
PERIOD Set/Get 31.25 ns to 67.11 s
PULSECOUNT Set/Get 0 to 4,294,967,295 (a value of 0 indicates
continuous pulse generation)
START
STOP
1 Analog output is supported on the USB-1608GX-2AO only.