Measurement Computing DAQFlex User Guide - Manual (Page 104)

DAQFlex Software User's Guide Hardware Reference – USB-1208FS-Plus
104
Component Supported
Property/Command Set/Get Supported Values
DEV
FLASHLED/{n} Set 0 to 255
FWV Get MM.mm (M = major; m = minor)
ID Set/Get Up to 56 characters
MFGCAL Get yyyy-mm-dd HH:MM:SS
MFGCAL{item} Get YEAR as yyyy; 20xx
MONTH as mm; 01 to 12
DAY as dd; 01 to 31
HOUR as HH; 01 to 23
MINUTE as MM; 01 to 59
SECOND as SS; 01 to 59
MFGSER Get Up to 8 hexadecimal digits
RESET/{value} Set DEFAULT
DIO
Get 2 (number of digital ports)
DIO{port}
Get 8 (number of bits on the port)
DIR Set/Get IN, OUT (port-configurable)
LATCH Set/Get 0 to 255
VALUE Set/Get 0 to 255
DIO{port/bit}
LATCH Set/Get port number: 0, 1
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
VALUE Set/Get port number: 0, 1
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
Hardware features
 8 single-ended (0 to 7), 4 differential (0 to 3) analog input channels
o Analog input ranges:
Single-ended mode: ±10V
Differential mode: ±20V, ±10V, ±5V, ±4V, ±2.5V, ±1.25V, ±1V, ±1.25V
o Sampling rate: 50 kS/s max rate
o Channel-gain queue: Up to eight unique, ascending elements; one gain element per channel.
o Resolution: 12-bit differential mode, 11-bit single-ended mode.
 2 analog output channels. The analog output range is 0 V to 5 V.
 16 DIO configured as two 8-bit ports. Each port is configurable for input or output.
 External digital trigger
 Bidirectional external clock
 32-bit event counter