Measurement Computing DAQFlex User Guide - Manual (Page 109)

DAQFlex Software User's Guide Hardware Reference – USB-1608FS-Plus
109
Component Supported
Property/Command Set/Get Supported Values
CTR
Get Number of counter channels
CTR{ch}
VALUE Get 0 to 4,294,967,295
Set 0
DEV
FLASHLED/{n} Set 0 to 255
FWV Get Firmware version of the device
MM.mm (M = major; m = minor)
ID Set/Get Up to 56 characters
MFGCAL Get yyyy-mm-dd HH:MM:SS
MFGCAL{item} Get YEAR as yyyy; 20xx
MONTH as mm; 01 to 12
DAY as dd; 01 to 31
HOUR as HH; 01 to 23
MINUTE as MM; 01 to 59
SECOND as SS; 01 to 59
MFGSER Get Up to 8 hexadecimal digits
RESET/{value} Set DEFAULT
DIO
Get Number of digital ports
DIO{port}
Get 1
DIR Set/Get IN, OUT
LATCH Set/Get 0 to 255
VALUE Set/Get 0 to 255
DIO{port/bit}
DIR Set/Get IN, OUT
LATCH Set/Get port number: 0
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
VALUE Set/Get port number: 0
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
Hardware features
 8 single-ended 16-bit simultaneous analog input channels, numbered 0 to 7.
o Analog voltage input ranges:
±10V
±5V
±2V
±1V
±0.625V
±0.3125V
o Sampling rate:
100 kS/s max rate for one channel
400 kS/s max aggregate rate, streaming. Limited by USB transfer speed; 800 kS/s max to 32K
sample FIFO
o Channel-gain queue– eight elements; one gain element per channel.
 8 DIO, individually configurable