Measurement Computing DAQFlex User Guide - Manual (Page 114)

DAQFlex Software User's Guide Hardware Reference – USB-1608G Series
114
Hardware features
 16 analog input channels, numbered 0 to 15.
 Analog input mode is configurable for single-ended (16 channels) or differential (8 channels).
o Analog input ranges:
o ±10V
o ±5V
o ±2V
o ±1V
 2 analog output channels, numbered 0 to 1 (USB-1608GX-2AO only)
The analog output range is fixed at ±10V.
 1 digital port (8 bits)
Each bit is individually configurable as input or output.
 1 timer output channel
 1 external trigger input
 External pacer input/output
This feature allows multiple devices to acquire synchronized samples.
 1,024 bytes of nonvolatile EEPROM memory; used for storing configuration information, calibration
data, and user data.
 RATE takes a float value
An error is generated if value is set is less than the device's minimum sampling rate or greater than
the device's maximum sampling rate.