Marantz SR6006 - Manual (Page 67)

64
Connect
6.1-channel (Surround back speaker) connection
If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the
SURR. BACK/AMP ASSIGN terminal.
For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (
vpage 61 ).
To perform 6.1-channel playback using the surround back speaker, set “Amp Assign” to “NORMAL” in
steps 3 and 4 for “Set up “Amp Assign”” (
vpage 69 ).
Also use the “Speaker Config.” setting ( vpage 106 ) to set “Surr.Back” to “1spkr”.
NOTE
• For speaker cable connections, see C page 6 “Connecting the speakers” .
• For speaker impedance , see page 62 .
FL FR
C
SB
SL SR
SW
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion