Marantz SR6006 - Manual (Page 121)

118
SYSTEM SETUP
Setting items Setting details
GUI
(Continued) Master Volume : Display the master volume during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to “Top”.
NET/USB : Set the NET/USB screen display time when the input source
is “NET/USB”.
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is
“iPod/USB”.
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Tuner : Set the tuner screen display time when the input source is
“HD Radio”.
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Zone Rename
Change the display title of
each zone to one you prefer. • Up to 10 characters can be input.
• For character input, see
page 90 .
Setting items Setting details
Trigger Out 1 /
Trigger Out 2
Select the condition for
activating Trigger Out 1/2 for
the input source, surround
mode, etc.
See “Connecting the DC
OUT (TRIGGER OUT) jacks”
(
vpage 72 ) for more
information on trigger out.
n When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
Trigger out is activated through linkage to the power of the zone set
to “ON”.
n When setting for input source
Activate trigger out when the input source set to “ON” is selected.
Active for the zone set to “ON” with “When setting for zone”.
n When setting for surround mode
Activate trigger out when the surround mode set to “ON” is selected.
Active when the “MAIN ZONE” set to “ON” with “When setting
for zone” is selected, and when the input source set to “ON” with
“When setting for input source” is selected.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to “ON” is selected.
Activate trigger out when the HDMI monitor set to “ON” is
selected. Active when the “MAIN ZONE” set to “ON” with
“When setting for zone” is selected, and when the input source
set to “ON” with “When setting for input source” is selected.
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
Display
Set the display on/off
setting. ON : Display is always on.
Auto OFF : Display is off except when showing the status display.
OFF : Display is always off.
• This can also be set by pressing DISP .
Each time DISP is pressed, the setting is changed as shown below.
ON Auto Off
OFF
• If DISPLAY on the main unit is pressed, the
same function as with the remote control unit
can be obtained.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
vSee overleaf
BD