Marantz SR6006 - Manual (Page 29)

26
Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey®
Auto Setup.
1
Use ui to select “Parameter Check” and then press ENTER .
SPEAKER SETUP
Auto Setup
Amp Assign
Speaker Config.
Bass Setting
Distance
Channel Level
Audyssey Auto Setup
Parameter Check
Check auto setup measurement results
2
Use ui to select the item you want to check, then press ENTER or p .
Measurement results for each speaker are displayed.
Speaker Config. Check Check the speaker configuration.
Distance Check Check the distance.
Channel Level Check Check the channel level.
Crossover Freq. Check Check the crossover frequency.
EQ Check Check the equalizer.
• If “EQ Check” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use
ui to switch the display between the different speakers.
3
Press RETURN .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey® Auto Setup settings
If you set “Restore” to “Yes”, you can return to Audyssey® Auto Setup measurement result (value
calculated at the start by MultEQ® XT) even when you have changed each setting manually.
Set up speakers (Audyssey® Auto Setup) Making the network settings
(Network Setup)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
1 Connect the Ethernet cable ( v page 19 “Connecting to a home network (LAN)”).
2
Turn on this unit ( C page 5 “Getting Started” ).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in “Network
Connecting” (
vpage 112 ).
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion