Leprecon LP-3000 Series - Manual (Page 98)

94 Chapter Eight Moving Light Cue Programming
LP-3000 Users Manual
To Check the Cue
When you have finished programming a Moving Light cue, you can check it
immediately.
1. Adjust Preset 0 down to the zero level position.
2. Bring up the playback to which you just assigned the cue.
The LP-3000 displays the first step in the cuelist.
3. Press the Preset Select button for the playback to view the next step in the
cuelist.
4. Continue to press the Preset Select button for the playback until you have
viewed all steps in the cuelist.