Leprecon LP-3000 Series - Manual (Page 110)

106 Chapter Ten Advanced Moving Light Cue Programming
LP-3000 Users Manual
3. Using the Scroll edgewheel, select the cue that you want to add, delete, edit
or rename.
If Playback 0 is up, as you scroll through the list of cues, they are displayed
in the lights.
4. With the cue selected, click Add, Delete, Edit or Rename.
To Add a New Cue to a Show
1. Open the Cue List.
Follow the first two steps of the procedure To Select a Cue for Editing
beginning on page 105.
2. Click Add.
The LP-3000 displays the New Cue dialog box.
3. Under Cue, enter a name for the new cue.
If you do not enter a name, the LP-3000 assigns a default name to the cue.
Default names follow the pattern CUE_001, CUE_002 and so forth.
4. Click OK to add the new cue.
If you do not want to add the cue, click Cancel.
To Delete a Cue from a Show
1. Open the Cue List and select the cue that you want to delete.
Follow the first three steps of the procedure To Select a Cue for Editing
beginning on page 105.