Leprecon LP-3000 Series - Manual (Page 168)

164 Appendix C Creating and Editing Moving Light Instruments
LP-3000 Users Manual
You can also reach this screen by following the procedure To Edit an
Instrument beginning on page 163. With the Edit Fixture screen displayed,
click Labels to open the Labels screen.
2. Use the Attribute edgewheel to select an attribute from the list.
Do not add labels for dimmer, pan, tilt or focus attributes. These cannot be
used by the LP-3000.
3. Click Add.
The LP-3000 adds an untitled label to the attribute.
4. In the DMX Value field, enter the DMX value for the label.
5. In the Label field, enter the name for the label.
6. Repeat steps 2 through 6 for all labels that you want to add to the
instrument.
7. If you make a mistake, select the label and click Delete.
8. When you are done, click Exit To Edit Device.
NOTE: The Set Bitmap button is reserved for a feature that will be available in an
upcoming release.
To Edit Attribute Labels for an Instrument
You can edit attribute labels for an instrument using the procedure given above or
the procedure for “live” editing given in Editing Labels which begins on page 126.