Leprecon LP-3000 Series - Manual (Page 162)

158 Appendix C Creating and Editing Moving Light Instruments
LP-3000 Users Manual
4. In the Name box, enter a name for the new device.
5. Press the T AB key.
6. In the Length box, enter the number of DMX channels required by the
device.
7. When you are done, click OK.
To Create a New Moving Light Device
1. From the Main screen, click Setup, DMX Lines and then Device List.
The LP-3000 displays the Device List screen.
2. If necessary, click Switch to LTP.
Moving lights are referred to as “Last Takes Precedence” devices or “LTP”.
The LP-3000 displays a list of the LTP instruments that have been loaded
into the show.
3. Click Create Device.
The LP-3000 displays the Create Device screen.