Leprecon LP-3000 Series - Manual (Page 39)

System Tools Chapter Three 35
LP-3000 Users Manual
This screen enables you to see the “holes” in the DMX map that would
accommodate new fixtures.
To View Fixture Information
Information about fixtures—such as moving light switch positions—is often available
in the LP-3000 Instrument Library. You use the Fixture Info command to view this
information.
1. From the Main screen, click Setup and then DMX Lines.
The LP-3000 displays the DMX Lines screen.
2. Using the Scroll edgewheel, select a fixture from the Fixtures list.
3. Click Fixture Info.
The LP-3000 displays information for the fixture if it is available in the
Instrument Library.
If there is no information for the fixture, the LP-3000 displays a message.