Leprecon LP-3000 Series - Manual (Page 42)

38 Chapter Three System Tools
LP-3000 Users Manual
The LP-3000 displays the Dimmer Patch screen.
2. Click Select Patch.
The LP-3000 displays the Select Patch screen.
3. Use the Modify edgewheel to scroll through the list of patches.
4. Click Select to load the patch.
Once a patch is selected, it is immediately applied to the LP-3000 DMX outputs.
To Create a New Patch
Use the Create button to build a new patch table.
1. From the Main screen, click Setup and then Dimmer Patch.
The LP-3000 displays the Dimmer Patch screen.
2. Click Select Patch.
The LP-3000 displays the Select Patch screen.
3. Click Create.
The LP-3000 displays the New Patch dialog box.
4. Enter a name for the patch or accept the default name and click OK.
Default names follow the pattern PATCH_001, PATCH_002 and so forth.
The LP-3000 loads the new patch.