Leprecon LP-3000 Series - Manual (Page 43)

System Tools Chapter Three 39
LP-3000 Users Manual
To Build a Custom Patch—First Step
1. From the Main screen, click Setup and then Dimmer Patch.
The LP-3000 displays the Dimmer Patch screen.
2. Select View By Dimmers or View By Channels.
View By Channels is used to patch multiple dimmers to a board channel.
The View By Dimmers option gives you a very fast way to patch one
dimmer at a time.
3. Select a patch.
4. Click Edit.
To Build a Custom Patch by Channel
When choosing View by Channels and clicking the Edit button, the LP-3000
displays the Edit Patch screen.
1. Click Dimmer and select the first dimmer for patching.
Use the Modify edgewheel to set the dimmer number.
2. Click Through and select the last dimmer in the dimmer block.
Use the Modify edgewheel to set the dimmer number.
3. Click At Level and use the Modify edgewheel to adjust the patch level.
4. Use the Channel edgewheel to change the channel number at any time—
either before or after the dimmers are chosen.